Beta-glucans: natural strength from wood-decay mushrooms, kept in honey

For many people, beta-glucans are an unfamiliar term. The video above is an introduction, but everything that matters is in the text below as well – what beta-glucans actually are, how the mushroom ones differ from those in oats, how they are coaxed out of a mushroom, and what on a label genuinely tells you something.

What beta-glucans are

Beta-glucans are polysaccharides – long chains of glucose molecules strung one onto the next. The name gives away what is special about them: the individual sugar units are held together by what is called a beta bond. Starch, the kind you know from potatoes or bread, is also a chain of glucose, but with an alpha bond – and that is precisely the one human enzymes can pull apart. With a beta bond they get nowhere. That is why beta-glucans are classed as fibre: they pass through the body as undigested building material rather than as a source of energy, and in terms of flavour they are practically neutral.

In a mushroom this is no marginal ingredient. Along with chitin, beta-glucans are the main building material of the cell walls – they are the fibres thanks to which the fruiting body holds its shape, carries its own weight and manages to push through the bark of a tree. So when we talk about beta-glucan content, we are talking quite literally about the skeleton of the mushroom.

One name, three different molecules

Behind the term beta-glucan lies not a single substance but a whole family. The individual types differ in where the glucose units are joined and how often the chain branches. Chemists write this down as bond numbers, and the differences are plain even to the naked eye:

  • Oats and barley: beta-glucans of the (1→3)(1→4) type. The chain is essentially linear, dissolves readily in water and thickens the liquid. That is the reason porridge turns out thick and slippery.
  • Baker’s and brewer’s yeast: the (1→3)(1→6) type with dense branching, obtained from yeast cell walls as a by-product of brewing.
  • Mushrooms: also the (1→3)(1→6) type, but both the length of the chain and the density of the branching differ from species to species, and even according to what the mushroom grew on. Mushroom beta-glucans do not dissolve in water easily – they sit firmly in the cell wall and have to be got out of it.

That difference is not cosmetic, and it is not merely a chemical curiosity either. Food law looks at these molecules as separate things too: approved claims in the European Union exist only for beta-glucans from oats and barley, and they do not extend to mushroom beta-glucans. Putting an equals sign between the two would therefore be wrong, both scientifically and formally.

Which mushrooms, and which part of them

The species processed most often here are the ones you know from labels under their shortened names: reishi (lacquered bracket, Ganoderma lucidum), chaga (birch conk, Inonotus obliquus), hericium (lion’s mane, Hericium erinaceus), maitake (hen of the woods, Grifola frondosa), shiitake (Lentinula edodes), almond mushroom (Agaricus blazei murill) and cordyceps (Cordyceps sinensis).

There is no single universal figure for how much beta-glucan they contain, and anyone who offers you one is simplifying. It depends on four things at once:

  • The species of mushroom. Each one has its own make-up of cell wall.
  • The part that is processed. The fruiting body (what we would colloquially call the mushroom) and the mycelium are two different raw materials with different compositions.
  • The substrate and the growing conditions. A mushroom takes whatever the wood or the substrate gives it.
  • The harvest and the drying. An overripe fruiting body and one gathered at the right moment are not the same thing.

With mycelium in particular, one thing is worth a closer look. It is usually grown on a grain substrate, and if it is not gathered separately at the end, the substrate goes into processing as well – and with it the grain and its starch. Starch, though, is an alpha-glucan, exactly the other molecule from the start of this article. Something “glucan-ish” is then present in the raw material, but it is not what the buyer is after.

How beta-glucans are got out of a mushroom

The cell wall is tough and does not dissolve in water – that is the whole problem. You can grind a dried mushroom into powder, but the beta-glucans stay locked inside the remains of the walls. That is why an extract is made, and the procedure has a logic of its own:

  • Drying and milling. First the fruiting bodies are gently dried and ground, so that the water has the largest possible surface to work on.
  • Hot-water extraction. Beta-glucans come out of the cell wall only under hot water, and only after several hours of it. A cold infusion is no match for them.
  • A possible second stage in alcohol. Some other mushroom substances, triterpenes for instance, barely dissolve in water at all, while in alcohol they do. That is why with certain species – reishi being the typical case – the extraction is done twice and the two liquids are brought together at the end.
  • Filtration, concentration, drying. The insoluble residue is taken out of the liquid, the water is evaporated off and what remains is dried into a powder.

This is also where the ratio commonly quoted for mushroom extracts comes from, the 8:1 or 10:1 – it says how many kilograms of dried mushroom went into one kilogram of extract. And a simple rule applies here: the gentler and more careful the process, the better the extract. Needlessly high temperatures or too long a spell of heating snap the long chains and the sugars in them begin to darken, so brute force yields no more beta-glucans – rather the opposite.

How the content is measured and how to spot a good extract

The figure you will meet most often on packaging is “polysaccharide content”. It is worth knowing that this is not the same thing as beta-glucan content – polysaccharide is the broader category, and the starch mentioned above belongs to it as well. A cheap extract from mycelium grown on grain can therefore show a high polysaccharide figure without being rich in the very thing this article has in its headline.

A laboratory can tell the two apart. The usual method is enzymatic: the sample is broken down, the alpha-glucans are determined separately and subtracted – and only what is left is genuine beta-glucan. It is a more laborious and more expensive analysis than measuring total polysaccharides, and that is exactly why a declared beta-glucan content says far more about the raw material.

So when you read a label, it pays to look for three things: what the extract is made from (fruiting body, or mycelium), how much extract there is in a single dose, and what content is guaranteed – and whether that means polysaccharides or beta-glucans as such. To give you an idea of how this looks with our capsules:

  • CORDYCEPS capsules 60 pcs: 500 mg of cordyceps extract in one capsule, with a guaranteed content of 50% polysaccharides and 25% beta-glucans.
  • REISHI capsules 60 pcs: 500 mg of concentrated lacquered bracket extract per capsule, with a guaranteed content of 50% polysaccharides and 10% triterpenes.
  • EXTA capsules 60 pcs: 500 mg of a blend of extracts from six mushroom species per capsule, with a guaranteed content of 50% polysaccharides.

Why honey, of all things

Mushroom extract is a dry, fine powder with a pronounced aroma and a bitter edge. On its own it is awkward to measure out, it blows about at the slightest draught and in damp air it cakes. Honey turns out to be a surprisingly good place to keep it – and that is not romance, it is physics.

Honey is a saturated sugar solution with a very small share of water, and naturally acidic into the bargain. There is almost no free water left in it for microorganisms to live on, which is why it lasts a long time without any preservative whatsoever. The powder stays evenly spread through it, does not settle into lumps and can be measured out with a spoon. In EXTRA in honey 900 g, honey makes up 95 grams in every hundred and a daily dose is 9 grams, which is one level teaspoon. In the other honey recipes the share of honey and the size of the dose differ a little – IMUNO - JUNIOR in honey 200 g has a 7 g dose, SLIM 2 in honey 2x200 g eight grams – so what counts is the figure on the label of the particular jar.

For the same reason, honey extracts are kept well away from heat. If you stir a spoonful into tea, the tea should be no hotter than 40 °C; a scalding drink is a needless ordeal for something that was made so painstakingly gently. Once opened, a jar should be used up within four months and kept somewhere dry and dark at room temperature.

What to take away from all this

Beta-glucans are under the scientific spotlight all over the world and what we know about their structure, their solubility and the ways of measuring them is growing by the month. For the buyer, though, one practical point follows above all: the words “beta-glucans” on a package say nothing in themselves. Ask which species and which part of the mushroom the extract comes from, how much of it there is in a dose, and what content the maker guarantees.

You will find both forms with us. CORDYCEPS capsules 60 pcs are pure and single-species, with a declared beta-glucan content and no taste of honey. EXTRA in honey 900 g, by contrast, is seven kinds of mushroom extract in South Bohemian honey, taken by the spoonful with no need to stir it into water.